Dynaudio Emit 10

Dynaudio Emit 10

Compact stand-mount speakers ideal for smaller spaces

£630.00

Clear
Friendly after sales support

Description

Dynaudio Emit M10

Dynaudio_Emit_M10_2021_Banner

Beautiful Sound, Small Package

The Dynaudio Emit 10s are the smallest speaker within the entry-level range. This does not mean they sound small, however.

Providing a wonderfully detailed sound characterised by Dynaudio’s rich speaker design heritage. The Emit 10s are versatile in and ideal for smaller rooms.

Classic Dynaudio Design

Each of Dynaudio Emit 10 speaker’s mid/bass driver is a 14cm long-throw unit made from MSP (Magnesium Silicate Polymer), just like all Dynaudio speakers have used for decades. Providing exactly the right combination of lightness, stiffness and damping for super-fine control without loss of power –essential when a driver is reproducing both low-bass and crucial midrange frequencies.

Newly designed surrounds extend their throw, their frequency response and their low-frequency dynamics. This is all while maintaining stellar midrange performance.

The woofer’s diaphragm is 0.4mm thin, which provides exactly the right combination of lightness, stiffness and damping to ensure optimum performance. It’s made of one piece (the dust-cap is part of the playing surface), and is bonded directly to the rigid glass-fibre voice-coil directly under the Balance Ribs you’ll see around the centre dome. That means the whole unit moves as one, in a predictable (and carefully tuned) way, for a performance that strikes the ideal balance between bass and midrange.

The voice-coil itself is made of copper-clad aluminium wire. Aluminium is light, which gives the driver a fleetness of foot you might not find elsewhere, while the copper coating increases conductivity for more power. It’s a winning combination for detail and punch. This is coupled with a high-quality double ferrite magnet system which provides the power. It’s a stacked design to keep it compact, but it serves another purpose: using two magnets means our engineers were able to control the magnetic flux, directing it back to the voice-coil, where it’s needed the most.

Cerotar: a brand-new tweeter

The Cerotar tweeter is a 28mm fabric soft-dome unit with a DSR (Dynaudio Secret Recipe) coating. Why fabric soft-dome tweeters? They convey all the detail and openness you could wish to hear from your recordings without subjecting you to unwanted fatigue over longer listening sessions.

The headline-grabbing component is the Hexis – an ingenious inner dome that refines the airflow behind the playing surface to smooth-out its frequency response and eliminate unwanted resonances.

The Emit 10’s use a first-order crossover for the tweeter and a  second-order topology for the mid/bass driver. The Emit 10’s crossover was designed by the same engineers that worked on Heritage Special and Dynaudio’s Core range of professional studio reference systems.

Dynaudio_Emit_M10_2021_Mid02
Dynaudio_Emit_M10_2021_Mid01
New Cerotar Tweeter
A brand-new 28mm Ferrite+ soft-dome tweeter inspired by Special Forty and Confidence
Hexis
An ingenious resonance-defeating inner tweeter dome, trickled down directly from our most exclusive ranges
New Esotec+ Woofer
A long-throw 14cm one-piece MSP design with an aluminium voice-coil and strontium carbonate Ferrite+ ceramic magnet
Crossover
High-grade Dynaudio topology with select components – just like their high-end hi-fi speakers
Danish Design
Timeless, honest and beautiful: subtly curved MDF with hidden screws and four beautiful, clean finishes
Previous
Next
Sensitivity:85dB (2.83V/1m)
IEC power handling:150W
Impedance:6 Ω
Frequency response (±3dB):64Hz–25kHz
Box principle:Bass reflex rear double flare ported
Crossover:2-way
Crossover frequency:3700Hz
Crossover topology:1st order tweeter / 2nd order woofer
Woofer:14cm MSP cone
Tweeter:28mm Cerotar with Hexis
Weight:6.43kg/14.2lb
Dimensions (W x H x D):170x290x271.5mm
 6.7×11.4×10.7in
Dimensions with feet/grille (W x H x D):170x290x284.5mm
 6.7×11.4×11.2in

Additional information

Weight 6.7 kg
Dimensions 26.6 × 18 × 31.5 cm
Colour

Black Matte, White Matte, Walnut Wood

Visit Our Store

1 Home Street
Edinburgh
EH3 9JR

10am – 6pm Monday to Saturday
12pm – 5pm on Sunday

There is ample metered parking in the area and 2 car parks nearby. For collecting and dropping off items, there is a loading bay directly outside. We will be delighted to load up your vehicle for you.

Enquire about

Dynaudio Emit 10