Dynaudio Emit 20
Beautiful Sound, Small Package
The Emit 20 is a high-performance standmountspeaker derived from our Evoke, Contour i and Confidence series. It gives a stellar combination of detail and punch for small to medium-sized rooms.
Providing a jaw-dropping performance from powerful standmounters. Wonderfully detailed sound characterised by Dynaudio’s rich speaker design heritage.
Classic Dynaudio Design
The Emit 20 uses an 18cm MSP (Magnesium Silicate Polymer) woofer, based on the one we’ve used in the Evoke series. The cone itself is a one-piece design; the dust-cap is moulded as part of the playing surface, which gives it a solid connection to the voice-coil that moves it back and forth.
The stacked ferrite magnet system and new surround, that gives Emit 20’s long-throw mid/bass driver all the bass power you could want, even at high volumes, combined with amazing control over midrange
The woofer’s diaphragm is 0.4mm thin, which provides exactly the right combination of lightness, stiffness and damping to ensure optimum performance. It’s made of one piece (the dust-cap is part of the playing surface), and is bonded directly to the rigid glass-fibre voice-coil directly under the Balance Ribs you’ll see around the centre dome. That means the whole unit moves as one, in a predictable (and carefully tuned) way, for a performance that strikes the ideal balance between bass and midrange.
The voice-coil itself is aluminium, wound onto a two-layer glass-fibre former. It’s light, so as not to impede fine movement and can also fit more windings on the former for a given length of wire. That means more ‘BL’, or magnetic power. More power means more punch. Complimented further by coating the aluminium wire in copper.
The Emit 20 uses the Cerotartweeter directly from Evoke. It’s a 28mm soft-dome design that includes the ingenious Hexis inner-dome device. The coated fabric dome delivers sweet-sounding high frequencies –all the openness and detail the artists want you to experience in their recordings –while the Hexis smooths the frequency response and reduces unwanted resonance for surprising clarity.
The mid/bass driver and tweeter are marshalled by a custom-designed crossover from the same team who brought you Heritage Special and Core. A hybrid system is used for the first-and second-order topology for the tweeter and woofer respectively, giving them exceptional control over each driver’s behaviour.
|IEC power handling:||160W|
|Frequency response (±3dB):||53Hz–25kHz|
|Box principle:||Bass reflex rear double flared ported|
|Crossover topology:||1st order tweeter / 2nd order woofer|
|Woofer:||18cm MSP cone|
|Tweeter:||28mm Cerotar with Hexis|
|Dimensions (W x H x D):||205.1x370x311.5mm|
|Dimensions with feet/grille (W x H x D):||205x370x324.5mm|