Colour	Clear

Description

Dynaudio Emit 30

Compact floorstanders for stereo and surround

Emit 30 is perfect for larger stereo systems or compact multi-channel home cinema set-ups in medium to large rooms. Providing a wonderfully detailed sound characterised by Dynaudio’s rich speaker design heritage.

Emit 30 is a compact two-and-a-half-way speaker designed to impress whether it’s used as a stand-alone stereo pair or as part of a 5.1-channel(or more) home cinema.

Classic Dynaudio Design

Like its little brother, Emit 10, it uses 14cm MSP wooferssimilar to those used in the Evoke series–this time doubled-up in each speaker for more low-frequency muscle, plusmidrange clarity and punch.

Newly designed surrounds extend their throw, their frequency response and their low-frequency dynamics. This is all while maintaining stellar midrange performance.

Each woofer is powered by a dual-stacked strontium carbonite Ferrite+ ceramic magnet system. Using two magnets means we can more effectively direct where the magnetic energy goes. That means the whole unit moves as one, in a predictable (and carefully tuned) way, for a performance that strikes the ideal balance between bass and midrange.

The 38mm voice-coil itself is made from aluminium windings in Emit 30. Aluminium is light (which minimises inertia on the cone’s back-and-forth movement), and because it’s lighterthan copper wire, it means we can pack more windings on to the two-layer glass-fibre former. More windings equals more power, and greater control over fine movement.

Cerotar tweeter

The 28mm coated soft-dome diaphragm is backed up by the clever Hexis innerdome. The playing surface has been specifically engineered to produce ultra-clear, ultra-detailed high-frequencies without breakup (even at high volumes), while the Hexis smooths the airflow behind it to reduces unwanted resonances. An aluminium voice-coil and airflow magnet system provide the power. Cerotar is designed for highperformance without listener fatigue –perfect if you’re given to long listening sessions.

The cones are moulded in one piece with the balance ribs around the edge of the centre, bonded directly to the voice-coil behind it. Making the whole motor assembly one solid piece. Using fewer moving parts gives our engineers fine control over how the speaker moves –which, in turn, means fine control over how it performs.

Cerotar Tweeter

A brand-new 28mm Ferrite+ soft-dome tweeter inspired by Special Forty and Confidence

Hexis

An ingenious resonance-defeating inner tweeter dome, trickled down directly from our most exclusive ranges

New Esotec+ Woofer

A long-throw 14cm one-piece MSP design with an aluminium voice-coil and strontium carbonate Ferrite+ ceramic magnet

Crossover

High-grade Dynaudio topology with select components – just like their high-end hi-fi speakers

Danish Design

Timeless, honest and beautiful: subtly curved MDF with hidden screws and four beautiful, clean finishes

Sensitivity:	87dB (2.83V/1m)
IEC power handling:	180W
Impedance:	4 Ω
Frequency response (±3dB):	44Hz–25kHz
Box principle:	Bass reflex rear double flare ported
Crossover:	2.5-way
Crossover frequency:	1000/3550Hz
Crossover topology:	1st order tweeter / 2nd order woofer

Woofer:	14cm MSP cone
Tweeter:	28mm Cerotar with Hexis
Weight:	15.53kg/34.2lb
Dimensions (W x H x D):	170x900x271.5mm
	6.7×35.4×10.7in
Dimensions with feet/grille (W x H x D):	267.56×946.5×335.4mm
	10.5×37.3×13.2in