Dynaudio Evoke 10

Dynaudio Evoke 10

Compact stand-mount speakers ideal for smaller spaces


Friendly after sales support


Dynaudio Evoke 10

Dynaudio Evoke 10 Walnut front lifestyle banner image

Beautiful Sound, Small Package

The Dynaudio Evoke 10s are the smallest speaker within the premium range. This does not mean they sound small, however.

Providing a wonderfully detailed sound characterised by Dynaudio’s rich speaker design heritage. The Evoke 10s are versatile in and ideal for smaller rooms.

Classic Dynaudio Design

Each of Dynaudio Evoke 10 speaker’s mid/bass driver is a 14cm long-throw unit made from MSP (Magnesium Silicate Polymer), just like all Dynaudio speakers have used for decades.

Newly designed surrounds extend their throw, their frequency response and their low-frequency dynamics. This is all while maintaining stellar midrange performance.

The woofer’s diaphragm is 0.4mm thin, which provides exactly the right combination of lightness, stiffness and damping to ensure optimum performance. It’s made of one piece (the dust-cap is part of the playing surface), and is bonded directly to the rigid glass-fibre voice-coil directly under the Balance Ribs you’ll see around the centre dome. That means the whole unit moves as one, in a predictable (and carefully tuned) way, for a performance that strikes the ideal balance between bass and midrange.

The 38mm voice-coil itself is made from aluminium, making it extremely light. That means Dynaudio can use more windings. More windings gives the speaker more control over the cone’s movement, which means more control over the sound. This applies even at high volumes and high frequencies.

Cerotar: a brand-new tweeter

Up top is the brand-new 28mm Cerotar soft-dome tweeter. Dynaudio’s engineers looked behind the curtain of the award-winning Special Forty and money-no-object Confidence tweeters and cherry-picked some key technologies to bring to Evoke. The headline-grabbing component is the Hexis – an ingenious inner dome that refines the airflow behind the playing surface to smooth-out its frequency response and eliminate unwanted resonances.

Linking the drivers together is a high-grade second-order crossover that uses the Confidence’s design with different components.

Dynaudio Evoke white side front lifestyle banner image
Dynaudio Evoke 10 Walnut top side front lifestyle banner image
New Cerotar Tweeter
A brand-new 28mm Ferrite+ soft-dome tweeter inspired by Special Forty and Confidence
An ingenious resonance-defeating inner tweeter dome, trickled down directly from our most exclusive ranges
New Esotec+ Woofer
A long-throw 14cm one-piece MSP design with an aluminium voice-coil and strontium carbonate Ferrite+ ceramic magnet
High-grade Dynaudio topology with select components – just like their high-end hi-fi speakers
Danish Design
Timeless, honest and beautiful: subtly curved MDF with hidden screws and four beautiful, clean finishes
Sensitivity:84dB (2.83V/1m)
IEC power handling:160W
Impedance:6 Ω
Frequency response (±3dB):47Hz–23kHz
Box principle:Bass reflex rear ported
Crossover frequency:1400Hz
Crossover topology:2nd order
Woofer:14cm MSP cone
Tweeter:28mm Cerotar with Hexis
Dimensions (W x H x D):180x315x266mm
Dimensions with feet/grille (W x H x D):180x315x277mm

Additional information

Weight 6.7 kg
Dimensions 26.6 × 18 × 31.5 cm

Black High Gloss, White High Gloss, Walnut Wood, Blonde Wood

Visit Our Store

1 Home Street

10am – 6pm Monday to Saturday
12pm – 5pm on Sunday

There is ample metered parking in the area and 2 car parks nearby. For collecting and dropping off items, there is a loading bay directly outside. We will be delighted to load up your vehicle for you.

Enquire about

Dynaudio Evoke 10