Dynaudio Evoke 20

Dynaudio Evoke 20

Slightly larger stand-mount speakers ideal for any space

£1,800.00

Clear
Friendly after sales support

Description

Dynaudio Evoke 20

Dynaudio Evoke 10 Walnut front lifestyle banner image

Impactful and Full-bodied Sound

The Dynaudio Evoke 20s are the largest bookshelf speaker in the range and the bigger sibling of the excellent Evoke 10s. The   slightly larger cabinet allows for even better room-filling potential and a deeper bass response.

Providing a wonderfully detailed sound characterised by Dynaudio’s rich speaker design heritage. The Evoke 20s are a precise bookshelf speaker that fills any space with full, rich sound.

Classic Dynaudio Design

Each of Dynaudio Evoke 20 speaker’s mid/bass driver is a 18cm long-throw unit made from MSP (Magnesium Silicate Polymer), just like all Dynaudio speakers have used for decades.

Newly designed surrounds extend their throw, their frequency response and their low-frequency dynamics. This is all while maintaining stellar midrange performance.

The woofer’s diaphragm is 0.4mm thin, which provides exactly the right combination of lightness, stiffness and damping to ensure optimum performance. It’s made of one piece (the dust-cap is part of the playing surface), and is bonded directly to the rigid glass-fibre voice-coil directly under the Balance Ribs you’ll see around the centre dome. That means the whole unit moves as one, in a predictable (and carefully tuned) way, for a performance that strikes the ideal balance between bass and midrange.

The 52mm voice-coil itself is made from aluminium, making it extremely light. That means Dynaudio can use more windings. More windings gives the speaker more control over the cone’s movement, which means more control over the sound. This applies even at high volumes and high frequencies.

Cerotar: a brand-new tweeter

Up top is the brand-new 28mm Cerotar soft-dome tweeter. Dynaudio’s engineers looked behind the curtain of the award-winning Special Forty and money-no-object Confidence tweeters and cherry-picked some key technologies to bring to Evoke. The headline-grabbing component is the Hexis – an ingenious inner dome that refines the airflow behind the playing surface to smooth-out its frequency response and eliminate unwanted resonances.

Linking the drivers together is a high-grade second-order crossover that uses the Confidence’s design with different components.

Dynaudio Evoke 20 Blonde Wood Lifestyle Image
Dynaudio Evoke 20 white Lifestyle Image
New Cerotar Tweeter
A brand-new 28mm Ferrite+ soft-dome tweeter inspired by Special Forty and Confidence
Hexis
An ingenious resonance-defeating inner tweeter dome, trickled down directly from our most exclusive ranges
New Esotec+ Woofer
A long-throw 18cm one-piece MSP design with an aluminium voice-coil and strontium carbonate Ferrite+ ceramic magnet
Crossover
High-grade Dynaudio topology with select components – just like their high-end hi-fi speakers
Danish Design
Timeless, honest and beautiful: subtly curved MDF with hidden screws and four beautiful, clean finishes
Previous
Next
Sensitivity:86dB (2.83V/1m)
IEC power handling:180W
Impedance:6 Ω
Frequency response (±3dB):40Hz–23kHz
Box principle:Bass reflex rear ported
Crossover:2-way
Crossover frequency:3200Hz
Crossover topology:2nd order
Woofer:18cm MSP cone
Tweeter:28mm Cerotar with Hexis
Weight:9.9kg/21.8lb
Dimensions (W x H x D):215x380x307mm
 8.5×15.0x12.1in
Dimensions with feet/grille (W x H x D):215x380x317mm
 8.5×15.0x12.5in

Additional information

Weight 9.9 kg
Dimensions 31.7 × 21.5 × 38 cm
Colour

Black High Gloss, White High Gloss, Walnut Wood, Blonde Wood

Visit Our Store

1 Home Street
Edinburgh
EH3 9JR

10am – 6pm Monday to Saturday
12pm – 5pm on Sunday

There is ample metered parking in the area and 2 car parks nearby. For collecting and dropping off items, there is a loading bay directly outside. We will be delighted to load up your vehicle for you.

Enquire about

Dynaudio Evoke 20