Dynaudio Evoke 30
Compact Floorstanding Speakers with a Dynamic Punch
The Dynaudio Evoke 30s are the most compact floorstanding speakers in the Evoke range. This makes them ideal for any size space where there is two floor spots available for the speakers to live in a stereo pair.
Providing a wonderfully detailed sound characterised by Dynaudio’s rich speaker design heritage. The Evoke 30s are a diminutive floorstanding loud speaker with a fullness that makes them suitable for any space.
Classic Dynaudio Design
Each Dynaudio Evoke 30 has two 14cm mid/bass drivers built to be long-throw and made from MSP (Magnesium Silicate Polymer), just like all Dynaudio speakers have used for decades.
Newly designed surrounds extend their throw, their frequency response and their low-frequency dynamics. This is all while maintaining stellar midrange performance.
The woofer’s diaphragm is 0.4mm thin, which provides exactly the right combination of lightness, stiffness and damping to ensure optimum performance. It’s made of one piece (the dust-cap is part of the playing surface), and is bonded directly to the rigid glass-fibre voice-coil directly under the Balance Ribs you’ll see around the centre dome. That means the whole unit moves as one, in a predictable (and carefully tuned) way, for a performance that strikes the ideal balance between bass and midrange.
The 52mm voice-coil itself is made from aluminium, making it extremely light. That means Dynaudio can use more windings. More windings gives the speaker more control over the cone’s movement, which means more control over the sound. This applies even at high volumes and high frequencies.
Cerotar: a brand-new tweeter
Up top is the brand-new 28mm Cerotar soft-dome tweeter. Dynaudio’s engineers looked behind the curtain of the award-winning Special Forty and money-no-object Confidence tweeters and cherry-picked some key technologies to bring to Evoke. The headline-grabbing component is the Hexis – an ingenious inner dome that refines the airflow behind the playing surface to smooth-out its frequency response and eliminate unwanted resonances.
Linking the drivers together is a high-grade second-order crossover that uses the Confidence’s design with different components.
|IEC power handling:||200W|
|Frequency response (±3dB):||40Hz–23kHz|
|Box principle:||Bass reflex rear ported|
|Crossover topology:||2nd order|
|Woofer:||2x14cm MSP cone|
|Tweeter:||28mm Cerotar with Hexis|
|Dimensions (W x H x D):||180x900x267mm|
|Dimensions with feet/grille (W x H x D):||268x920x342mm|