Floorstand Speakers

{"id":14898159812985,"title":"ProAc K3 Reference Speakers","handle":"proac-k3-reference-speakers-t","description":"\u003cp\u003eThe K series range of speakers are called so because of the use of Kevlar in the construction of the drive units. So far ProAc have only used Kevlar and Carbon Fibre for bass and lower midrange reproduction in large enclosures. These cones have a light, stiff quality, the Kevlar has more warmth making excellent bass transients and extension. Cone material is something that ProAc have been developing over the last fifteen years with an emphasis on Carbon fibre and Kevlar. A new Kevlar cone was developed which would work into the midrange far better than previous Carbon fibre or Kevlar cones, this also has the added benefit of a phase plug giving better detail and dispersion.\u003c\/p\u003e\n\u003cp\u003eThe new Kevlar drive unit was developed for the K3 and has excellent weight to the bass as well as good extension with a detailed and uncoloured midrange. This new Kevlar unit would go into a new speaker called the K3, two of these units are used with our ribbon tweeter placed centrally in our K constructed cabinet. A high quality crossover was specially designed for the K3 to seamlessly mate with the ribbon tweeter and this new crossover uses high quality components split for bi-amping and bi-wiring and connected directly to the terminals.\u003c\/p\u003e\n\u003cp\u003eAs far as sound quality goes the K3 has a wonderfully electrostatic type of midrange very clear and detailed, with a dynamic bass response.\u003c\/p\u003e\n\u003cp\u003eWe are sure the K3 will give customers who desire music from full orchestral to loud rock the desired results with ease.\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eSpecifications\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal Impedance:\u003c\/strong\u003e    4 ohms\u003cbr\u003e\u003cstrong\u003eRecommended Amplifiers: \u003c\/strong\u003e   10-250W\u003cbr\u003e\u003cstrong\u003eFrequency Response: \u003c\/strong\u003e   25Hz-30KHz\u003cbr\u003e\u003cstrong\u003eSensitivity: \u003c\/strong\u003e   89 dB linear for 1 watt at 1 metre\u003cbr\u003e\u003cstrong\u003eBass\/Midrange: \u003c\/strong\u003e   2x 6.5 special bass\/midrange drive unit with Kevlar cone and phase plug.\u003cbr\u003e\u003cstrong\u003eTweeter:   \u003c\/strong\u003e ProAc ribbon with diaphragm as light as a human hair, alnico magnet and rear chamber damping.\u003cbr\u003e\u003cstrong\u003eCrossover: \u003c\/strong\u003e   Finest components on dedicated dual layer circuit board. ProAc multistrand oxygen free copper cable throughout. Split for optional Bi-Wiring or Bi-Amplification.\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e    Cabinet Height: 42 1\/4 inches (1073mm) Width: 8.5 inches (215mm) Depth: 13.5 inches (340mm)\u003cbr\u003e\u003cstrong\u003eWeight: \u003c\/strong\u003e   Weight 42kgs (93.5lbs) each cabinet (not packed) total packed weight per pair 88Kg (194lbs)\u003cbr\u003e\u003cstrong\u003eMode: \u003c\/strong\u003e   Floor standing\u003cbr\u003e\u003cstrong\u003eGrille:\u003c\/strong\u003e    Acoustically transparent crimplene\u003cbr\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e    Standard Finishes: Black Ash, Mahogany, Cherry, Silk White, Natural Oak and Walnut\u003cbr\u003ePremium Finishes: Rosewood, Ebony.\u003cbr\u003ePremium Finishes to order at extra cost\u003c\/p\u003e","published_at":"2025-03-04T12:34:51+00:00","created_at":"2025-02-12T15:01:21+00:00","vendor":"ProAc","type":"Floorstanding Speakers","tags":["Floorstanding Speakers","ProAc"],"price":1150000,"price_min":1150000,"price_max":1150000,"available":true,"price_varies":false,"compare_at_price":1150000,"compare_at_price_min":1150000,"compare_at_price_max":1150000,"compare_at_price_varies":false,"variants":[{"id":54947685630329,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"ProAc K3 Reference Speakers","public_title":null,"options":["Default Title"],"price":1150000,"weight":0,"compare_at_price":1150000,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/james-morrow.com\/cdn\/shop\/files\/New_Project-142.webp?v=1741090546","\/\/james-morrow.com\/cdn\/shop\/files\/New_Project-143.webp?v=1741090546","\/\/james-morrow.com\/cdn\/shop\/files\/New_Project-144.webp?v=1741090546"],"featured_image":"\/\/james-morrow.com\/cdn\/shop\/files\/New_Project-142.webp?v=1741090546","options":["Title"],"media":[{"alt":null,"id":64140480217465,"position":1,"preview_image":{"aspect_ratio":1.333,"height":600,"width":800,"src":"\/\/james-morrow.com\/cdn\/shop\/files\/New_Project-142.webp?v=1741090546"},"aspect_ratio":1.333,"height":600,"media_type":"image","src":"\/\/james-morrow.com\/cdn\/shop\/files\/New_Project-142.webp?v=1741090546","width":800},{"alt":null,"id":64140480184697,"position":2,"preview_image":{"aspect_ratio":1.333,"height":600,"width":800,"src":"\/\/james-morrow.com\/cdn\/shop\/files\/New_Project-143.webp?v=1741090546"},"aspect_ratio":1.333,"height":600,"media_type":"image","src":"\/\/james-morrow.com\/cdn\/shop\/files\/New_Project-143.webp?v=1741090546","width":800},{"alt":null,"id":64140480151929,"position":3,"preview_image":{"aspect_ratio":1.333,"height":600,"width":800,"src":"\/\/james-morrow.com\/cdn\/shop\/files\/New_Project-144.webp?v=1741090546"},"aspect_ratio":1.333,"height":600,"media_type":"image","src":"\/\/james-morrow.com\/cdn\/shop\/files\/New_Project-144.webp?v=1741090546","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe K series range of speakers are called so because of the use of Kevlar in the construction of the drive units. So far ProAc have only used Kevlar and Carbon Fibre for bass and lower midrange reproduction in large enclosures. These cones have a light, stiff quality, the Kevlar has more warmth making excellent bass transients and extension. Cone material is something that ProAc have been developing over the last fifteen years with an emphasis on Carbon fibre and Kevlar. A new Kevlar cone was developed which would work into the midrange far better than previous Carbon fibre or Kevlar cones, this also has the added benefit of a phase plug giving better detail and dispersion.\u003c\/p\u003e\n\u003cp\u003eThe new Kevlar drive unit was developed for the K3 and has excellent weight to the bass as well as good extension with a detailed and uncoloured midrange. This new Kevlar unit would go into a new speaker called the K3, two of these units are used with our ribbon tweeter placed centrally in our K constructed cabinet. A high quality crossover was specially designed for the K3 to seamlessly mate with the ribbon tweeter and this new crossover uses high quality components split for bi-amping and bi-wiring and connected directly to the terminals.\u003c\/p\u003e\n\u003cp\u003eAs far as sound quality goes the K3 has a wonderfully electrostatic type of midrange very clear and detailed, with a dynamic bass response.\u003c\/p\u003e\n\u003cp\u003eWe are sure the K3 will give customers who desire music from full orchestral to loud rock the desired results with ease.\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eSpecifications\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal Impedance:\u003c\/strong\u003e    4 ohms\u003cbr\u003e\u003cstrong\u003eRecommended Amplifiers: \u003c\/strong\u003e   10-250W\u003cbr\u003e\u003cstrong\u003eFrequency Response: \u003c\/strong\u003e   25Hz-30KHz\u003cbr\u003e\u003cstrong\u003eSensitivity: \u003c\/strong\u003e   89 dB linear for 1 watt at 1 metre\u003cbr\u003e\u003cstrong\u003eBass\/Midrange: \u003c\/strong\u003e   2x 6.5 special bass\/midrange drive unit with Kevlar cone and phase plug.\u003cbr\u003e\u003cstrong\u003eTweeter:   \u003c\/strong\u003e ProAc ribbon with diaphragm as light as a human hair, alnico magnet and rear chamber damping.\u003cbr\u003e\u003cstrong\u003eCrossover: \u003c\/strong\u003e   Finest components on dedicated dual layer circuit board. ProAc multistrand oxygen free copper cable throughout. Split for optional Bi-Wiring or Bi-Amplification.\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e    Cabinet Height: 42 1\/4 inches (1073mm) Width: 8.5 inches (215mm) Depth: 13.5 inches (340mm)\u003cbr\u003e\u003cstrong\u003eWeight: \u003c\/strong\u003e   Weight 42kgs (93.5lbs) each cabinet (not packed) total packed weight per pair 88Kg (194lbs)\u003cbr\u003e\u003cstrong\u003eMode: \u003c\/strong\u003e   Floor standing\u003cbr\u003e\u003cstrong\u003eGrille:\u003c\/strong\u003e    Acoustically transparent crimplene\u003cbr\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e    Standard Finishes: Black Ash, Mahogany, Cherry, Silk White, Natural Oak and Walnut\u003cbr\u003ePremium Finishes: Rosewood, Ebony.\u003cbr\u003ePremium Finishes to order at extra cost\u003c\/p\u003e"}

{"id":8839987593459,"title":"ProAc Response D20R\/D","handle":"proac-response-d20r-d","description":"\u003cp\u003e\u003cstrong\u003eRESPONSE D20\/D\/R\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe Response D20 has proven to be one of ProAc’s most successful designs.\u003cbr\u003eAvailable with the choice of either a dome (D20D) or a ribbon (D20R) tweeter.\u003c\/p\u003e\n\u003cp\u003eThe cabinet design uses the same type of bass loading as the D30S and D48 models which makes the speaker easier to position with respect to its frequency response.\u003c\/p\u003e\n\u003cp\u003eThe result is a wonderful open and expansive midrange with a substantial bass and sweet and detailed high frequencies from either ProAc tweeter option. A large sound stage is also a bonus.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatured veneers: Rosewood and Silk White\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePremium finishes also available.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease contact the store on 0131 229 8777 to discuss finish options \u003c\/strong\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOMINAL IMPEDANCE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e8 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRECOMMENDED AMPLIFIERS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e20 to 180 watts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREQUENCY RESPONSE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e28Hz-33kHz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSENSITIVITY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e88.5dB linear for 1 watt at 1 metre\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBASS \/MIDRANGE DRIVERS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProAc 165mm (6.5”) unit features glass fibre weave cone, Excel magnet system and unique acrylic damping phase plug.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDOME TWEETER OPTION D20D\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProAc 25mm (1”) silk dome air cooled and inner damping. Mirror image offset.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRIBBON TWEETER OPTION D20R\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ProAc ribbon tweeter has a ribbon lighter than a human hair with rear chamber damping and alnico magnet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCROSSOVER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFinest components on dedicated circuit board. Multistrand oxygen free copper cable throughout. Split for optional Bi wiring or Bi amplification\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHEIGHT (CABINET)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e978mm (38.5”) on spikes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWIDTH (CABINET)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e193mm (7.6”)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDEPTH (CABINET)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e282mm (11”)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEIGHT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e24kg (52.9lb) each cabinet\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMODE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFloor standing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGRILLE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAcoustically transparent crimplene\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSTANDARD FINISHES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBlack Ash, Mahogany, Cherry, Silk White, Oak and Walnut\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePREMIUM FINISHES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRosewood, Ebony. *Premium Finishes to order at extra cost*\u003c\/p\u003e","published_at":"2024-07-20T12:56:56+01:00","created_at":"2024-07-20T12:54:16+01:00","vendor":"ProAc","type":"Floorstanding Speakers","tags":["Floorstanding Speakers","ProAc"],"price":382500,"price_min":382500,"price_max":382500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46012234203379,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"ProAc Response D20R\/D","public_title":null,"options":["Default Title"],"price":382500,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/james-morrow.com\/cdn\/shop\/files\/RD20R2.jpg?v=1721476065","\/\/james-morrow.com\/cdn\/shop\/files\/RD20R8.jpg?v=1721476065","\/\/james-morrow.com\/cdn\/shop\/files\/RD20R9.jpg?v=1721476065","\/\/james-morrow.com\/cdn\/shop\/files\/RD20R12.jpg?v=1721476065"],"featured_image":"\/\/james-morrow.com\/cdn\/shop\/files\/RD20R2.jpg?v=1721476065","options":["Title"],"media":[{"alt":null,"id":34505568059635,"position":1,"preview_image":{"aspect_ratio":1.501,"height":533,"width":800,"src":"\/\/james-morrow.com\/cdn\/shop\/files\/RD20R2.jpg?v=1721476065"},"aspect_ratio":1.501,"height":533,"media_type":"image","src":"\/\/james-morrow.com\/cdn\/shop\/files\/RD20R2.jpg?v=1721476065","width":800},{"alt":null,"id":34505568092403,"position":2,"preview_image":{"aspect_ratio":1.501,"height":533,"width":800,"src":"\/\/james-morrow.com\/cdn\/shop\/files\/RD20R8.jpg?v=1721476065"},"aspect_ratio":1.501,"height":533,"media_type":"image","src":"\/\/james-morrow.com\/cdn\/shop\/files\/RD20R8.jpg?v=1721476065","width":800},{"alt":null,"id":34505568125171,"position":3,"preview_image":{"aspect_ratio":1.501,"height":533,"width":800,"src":"\/\/james-morrow.com\/cdn\/shop\/files\/RD20R9.jpg?v=1721476065"},"aspect_ratio":1.501,"height":533,"media_type":"image","src":"\/\/james-morrow.com\/cdn\/shop\/files\/RD20R9.jpg?v=1721476065","width":800},{"alt":null,"id":34505568157939,"position":4,"preview_image":{"aspect_ratio":1.501,"height":533,"width":800,"src":"\/\/james-morrow.com\/cdn\/shop\/files\/RD20R12.jpg?v=1721476065"},"aspect_ratio":1.501,"height":533,"media_type":"image","src":"\/\/james-morrow.com\/cdn\/shop\/files\/RD20R12.jpg?v=1721476065","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eRESPONSE D20\/D\/R\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe Response D20 has proven to be one of ProAc’s most successful designs.\u003cbr\u003eAvailable with the choice of either a dome (D20D) or a ribbon (D20R) tweeter.\u003c\/p\u003e\n\u003cp\u003eThe cabinet design uses the same type of bass loading as the D30S and D48 models which makes the speaker easier to position with respect to its frequency response.\u003c\/p\u003e\n\u003cp\u003eThe result is a wonderful open and expansive midrange with a substantial bass and sweet and detailed high frequencies from either ProAc tweeter option. A large sound stage is also a bonus.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatured veneers: Rosewood and Silk White\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePremium finishes also available.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease contact the store on 0131 229 8777 to discuss finish options \u003c\/strong\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOMINAL IMPEDANCE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e8 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRECOMMENDED AMPLIFIERS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e20 to 180 watts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREQUENCY RESPONSE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e28Hz-33kHz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSENSITIVITY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e88.5dB linear for 1 watt at 1 metre\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBASS \/MIDRANGE DRIVERS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProAc 165mm (6.5”) unit features glass fibre weave cone, Excel magnet system and unique acrylic damping phase plug.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDOME TWEETER OPTION D20D\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProAc 25mm (1”) silk dome air cooled and inner damping. Mirror image offset.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRIBBON TWEETER OPTION D20R\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ProAc ribbon tweeter has a ribbon lighter than a human hair with rear chamber damping and alnico magnet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCROSSOVER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFinest components on dedicated circuit board. Multistrand oxygen free copper cable throughout. Split for optional Bi wiring or Bi amplification\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHEIGHT (CABINET)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e978mm (38.5”) on spikes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWIDTH (CABINET)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e193mm (7.6”)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDEPTH (CABINET)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e282mm (11”)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEIGHT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e24kg (52.9lb) each cabinet\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMODE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFloor standing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGRILLE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAcoustically transparent crimplene\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSTANDARD FINISHES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBlack Ash, Mahogany, Cherry, Silk White, Oak and Walnut\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePREMIUM FINISHES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRosewood, Ebony. *Premium Finishes to order at extra cost*\u003c\/p\u003e"}